ZR Grade Pyro-Bloc® Y2™ Module

Note: This is a variation of Pyro-Bloc Y™ & Y2™ Modules (2400ºF – 2600ºF Range).

  • Monolithic, edge-grained ceramic fiber module
  • Available in uncompressecell nameensities from 8-15 pcf
  • One-shot center-fired stud
  • Extremely fast, efficient installation
  • High density fiber resists mechanical abuse

The modules are manufactured from a high purity blend of raw materials which are used to produce R Grade (alumina-silica), ZR Grade (alumina-zirconia-silica). and C Grade (alumina-silica-chromia) ceramic fibers. The modules utilize a specially designed 316 stainless steel internal support system and industry standard Pyro-Bloc stud system. In addition, it has no hot face, cold face, or side constrictions which permit maximum module to module compression during installation. The modules use the proven center-fire, one-step weld system which eliminates the need for pre-layed out stud patterns.

Pyro-Bloc® Y™ Modules
R Grade, ZR Grade, C Grade

The Pyro-Bloc Y Module is an edge-grained ceramic fiber block used for lining Industrial furnaces. The Y Module comes complete with internal support system and stud already in place.

  • 12″ x 12″ modules
  • 12″ x 24″ dual modules
  • 6″ x 12″ split long fiber modules
  • 12″ x 6″ split short fiber modules
  • Module thickness from 3″ lo 12″ in 1″ increments

Pyro-Bloc® Y2™ Modules
R Grade, ZR Grade

The Pyro-Bloc Y2 (Y-squared 16″ x 16″) Module is a larger format edge-grained ceramic fiber block used for lining industrial furnaces. The 16″ square size offers up to 78% more installed square feet per module than 12″ x 12″ modules. In addition, the 16″ square size is much easier to handle when compared to 24″ x 24″ modules.

  • 16″ x 16″ modules (1.78 sf per module)
  • Module thickness from 3″ to 12″ in 1″ increments

Specifications

Thermal Conductivity at 500ºF (260ºC)0.49 BTU-in/hr-ft²-ºF at 15 pcf
0.50 BTU-in/hr-ft²-ºF at 12 pcf
0.52 BTU-in/hr-ft²-ºF at 10 pcf
0.53 BTU-in/hr-ft²-ºF at 8 pcf
Thermal Conductivity at 1000ºF (540ºC)0.84 BTU-in/hr-ft²-ºF at 15 pcf
0.96 BTU-in/hr-ft²-ºF at 12 pcf
1.04 BTU-in/hr-ft²-ºF at 10 pcf
1.13 BTU-in/hr-ft²-ºF at 8 pcf
Thermal Conductivity at 1500ºF (816ºC)1.43 BTU-in/hr-ft²-ºF at 15 pcf
1.66 BTU-in/hr-ft²-ºF at 12 pcf
1.81 BTU-in/hr-ft²-ºF at 10 pcf
1.97 BTU-in/hr-ft²-ºF at 8 pcf
Thickness ( in )3 to 12
Melting Point ( ºF )3200
Thermal Conductivity at 2000ºF (1093ºC)2.19 BTU-in/hr-ft²-ºF at 15 pcf
2.45 BTU-in/hr-ft²-ºF at 12 pcf
2.69 BTU-in/hr-ft²-ºF at 10 pcf
2.95 BTU-in/hr-ft²-ºF at 8 pcf
Density ( lb/ft³ )10
12
15
ColorWhite
Chemical AnalysisAlumina (Al2O3) - 37.5%
Loss of Ignition - Trace
Other - Trace
Silica (SiO2) - 4%
Zirconia (ZrO2) - 15.5%
Maximum Temperature Rating ( ºF )2600
Continuous Use Limit ( ºF )0 to 2450
Back to top