Quik-Cote is a mineral fiber hydraulic-setting thermal insulating and finishing cement. It is a dry mixture of mineral fiber pellets and other insulating fillers blended with hydraulic setting binders and corrosion inhibitors. When water is added, a highly plasticell nameement is formed with excellent trowelling and palming characteristics. The wet cement takes a hydraulic set in about 2 hours and, upon drying, provides a smooth, off-white, monolithic finish on the applied surface.
|Thermal Conductivity at 200ºF (93ºC)
|Thermal Conductivity at 400ºF (204ºC)
|Service Temperature ( ºF )
|Up to 1200
|Approx. Dry Coverage
|27 BF/90 lbs.
|Approx. Green Set ( h )
|45 lb. moisture resistant kraft bags
|Thermal Conductivity at 600ºF (279ºC)
This information is accurate and reliable to the best of our knowledge and will vary with manufacturing and testing tolerances. We have no control over installation workmanship, accessory materials or application conditions, and make no representation or expressed or implied warranty, either as to merchantability or fitness, beyond the description herein.
“Quik-Cote” is used to form a hard, monolithic finish over fibrous insulation products. It is also used to seal joints and point cracks on compound type (calcium silicate) insulation materials. It is commonly used to insulate valves, fittings and other complex shapes.
“Quik-Cote” insulates and finishes in a single operation. It is applied by trowelling or palming to a single desired thickness and should not be applied in more than one coat. A metal fabric is recommended when trowelling over fibrous materials. When applied indoors, “Quik-Cote” requires no further treatment and may be painted if desired. However, for outdoor applications, it is mandatory that a permanent protective coating be applied 24 to 48 hours after the cement is set.
ASTM C-795 (Special order)
MIL-l-24244 (Special order)
NRC-RG 1.36 (Special order)