An air-setting adhesive of thin consistency and high surface tension, designed primarily for applying ceramic wool modules to both vertical and horizontal surfaces and for cementing ceramic fiber boards and blankets to each other or to other refractory surfaces.
Packed in 80 lb. or 55 lb. plastic pails.
Typical Test Data
According to ASTM Standard Test Methods, where applicable.
|Chemical Analysis||Alkalies (Na2O - K2O) - 4.7%|
Alumina (Al2O3) - 45.1%
Calcium oxide (CaO) - 0.2%
Ferric Oxide (Fe2O3) - 1.6%
Magnesia (MgO) - 0.1%
Silica (SiO2) - 46.4%
Titania (TiO2) - 1.9%
|Pyrometric Cone Equivalent (PCE)||31 to 32|
|Temperature Equivalent ( ºC )||1683 to 1717|
|Temperature Equivalent ( ºF )||3061 to 3123|
|Limit Use ( ºC )||1650|
|Limit Use ( ºF )||3000|
|Refractoriness Test (2910ºF - 1600ºC)||Passes|
|Bond Strength After Drying (230ºF - 1600ºC) ( kg/cm² )||11 to 21|
|Bond Strength After Drying (230ºF - 1600ºC) ( lb/in² )||150 to 300|
|Particle Size||Complies with ASTM C178 requirements for mortars.|
|Approx. Amount Required to Lay 1000 Brick ( kg )||158|
|Approx. Amount Required to Lay 1000 Brick ( lb )||350|
Troweled onto surface of module – approximately 1/2 to 3/4 lb./sq ft.