1100 Machining Grade Sheet/Rod

Note: This is a variation of Micatemp / Mycalex (750ºF – 1300ºF Machinable Ceramic Materials).

Micatemp Machinable Glass/Mica Ceramic Composite are designed for electro-mechanical and thermo-mechanical applications requiring one or more of the following properties: good machinability, excellent resistance to heat and/or open flame up to 1832ºF (1000ºC), low thermal conductivity, excellent electrical insulation, extremely high resistance to pressure, high resistance to impact (cracking, and chipping), impervious to most chemicals (including oil, grease, and water), asbestos-free, and ecologically safe and non-toxic.

Specifications

FlammabilityDoes not burn
Moisture AbsorptionNil
Hardness - Rockwell H ( H )90
Hardness - Brinell ( H )56
Density ( lb/in³ )0.10
Flexural Strength ( psi )11000
Specific Gravity2.8
Coefficient of Thermal Expansion ( in/in/ºF )5.2 x 10-6
Coefficient of Thermal Expansion ( in/in/ºC )9.4 x 10-6
Tensile Strength ( psi )5000
Compressive Strength ( psi )32000
Arc Resistance ( sec )325
Thermal Conductivity ( BTU-in/hr-ft²-ºF )0.00140
Thermal Conductivity ( cal cm/secell namem² ºF )0.34
Dielectric Constant ( MHz )6.8
Specific Heat ( cal/g/ºC )0.11
IZOD Impact Strength ( ft lb/in )1.3
Maximum Continuous Operating Temperature ( ºC )595
Maximum Continuous Operating Temperature ( ºF )1100
Mica FillerSynthetic
Radiation Resistance (3 x 1010 Rods-Cobalt)Excellent
Dielectric Strength (1/8" Thick) ( V/mil )380
Permittivity ( MHz )6.8
Dissipation Factor ( MHz )0.0017
Loss Index ( MHz )0.012
Dry Surface Resistivity at (70ºF) ( ohm-cm )1016
Volume Resistivity at 70ºF ( ohm-cm )1014
Wet Surface Resistivity at (70ºF) ( ohm-cm )1011
Modulus of Elasticity (in Tension) ( psi )10.6 x 106
Back to top