H-24899 Plate

Note: This is a variation of Micarta Industrial Laminates (High Pressure Laminates) (NEMA Rated Sheets, Tubes, and Rods).

Micarta is a line of Industrial High Pressure Laminates available in sheets and tubes. The materials are constructed from a base reinforcement material laminated using one of several resin systems. Like other building materials, Micarta comes in a number of standard shapes and panels. Flat sheets are manufactured up to 16 inches in thickness and in sizes up to 5 feet by 12 feet. There are more than 1500 standard round, rectangular, square and elliptical Micarta convolute tubing products available. These are available with a range of inside and outside diameters, wall thicknesses and lengths. There is also a choice of oil, sanded or special finishes. Filament-wound tubing is available with up to 60 inch inside diameters, wall thicknesses up to 3 inch, in lengths up to 20 feet. Shapes other than cylindrical can be manufactured. A wide range of molded structural rods, angles, channels and zees of various materials ancell nameimensions are available. Micarta materials meet or exceed all applicable NEMA requirements.

Specifications

ColorBlack
Plate Size ( in )36 x 48
36 x 72
48 x 108
48 x 48
48 x 96
Nominal Thickness0.031 to 5 in for (36 x 72 in Plate Size)
0.031 to 5 in for (36 x 48 in Plate Size)
0.031 to 5 in for (48 x 48 in Plate Size)
0.031 to 5 in for (48 x 96 in Plate Size)
0.031 to 5 in for (48 x 108 in Plate Size)
Construction Resin & SubstratePhenolic/Canvas/Graphite
Molded Nominal Thickness1/32 in (± 0.0065)
3/64 in (± 0.0075)
1/16 in (± 0.0075)
3/32 in (± 0.009)
1/8 in (± 0.010)
5/32 in (± 0.011)
3/16 in (± 0.0125)
7/32 in (± 0.014)
5/8 in (+ 0.053)
3/4 in (+ 0.058)
7/8 in (+ 0.062)
1 in (+ 0.065)
1-1/4 in (+ 0.073)
1-1/2 in (+ 0.081)
1-3/4 in (+ 0.089)
2 in (+ 0.097)
1/4 in (+ 0.030)
5/16 in (+ 0.035)
3/8 in (+ 0.040)
7/16 in (+ 0.044)
1/2 in (+ 0.048)
Back to top